高空作业平台是用于户外或室内的可移动式升降平台。现被广泛用于各行业高空作业、设备安装、检修等。高空作业平台相关产品主要有：直臂/曲臂式高空作业平台、剪叉式高空作业平台（人工手推式、自行走式）、桅柱式高空作业平台、套缸式高空作业平台、蜘蛛式高空作业平台七大类。高空作业平台以自身的可移动性、灵活操作性而广受各行业消费者喜爱。随着高空作业平台在国内市场认可度越来越高，平台的使用范围也越来越广。因此对高空作业平台的规范操作就变的尤其重要。下面，就为大家介绍一下如何规范操作高空作业平台。

      ◆1、使用高空作业平台作业时必须配置专业操作人员，并经过专门培训，并考试合格，持证上岗。
    ◆2、高空作业平台驾驶员必须按照机械的保养规定，在执行各项检查和保养后方可启动设备，作业前应检查设备的工作范围，并清除妨碍设备作业及行走的障碍物。
    ◆3、支腿是高空作业平台操作的一项重要准备工作，应选择平整的地面，地基松软或起伏不平的地面，必须加垫材料保证受力后，才可进行工作。

    ◆4、设备操作人员应做好佩带安全帽、系安全带等安全保护措施方可作业，在带电区域工作时，应将车体按规定进行接地，设备登高作业由场地工作负责人进行指挥，指挥人员发出的信号必须清楚、准确。
    ◆5、设备作业前，工作负责人应向设备操作人员及参加作业的全体人员进行技术和安全交底，内容应包括：工作内容及要求；安全注意事项及危险点；人员分工情况及责任范围；工作责任人除要对车况和工作人员工作进行检查以外，还要负责查看地形环境、起降是否符合安全技术措施的要求或事先制定的工作方案，如有出入，则应制定出相应的措施后方能开始工作。
    ◆6、此规定若有与国家或行业规定相抵触的地方，按国家或行业规定执行。

       以上就是高空作业平台的基本操作规范讲解。设备使用者需养成经常检测设备的运行情况，定期为设备制定保养计划。这样既可延长设备的使用寿命，也能更大程度的保证设备使用者的安全。

     High-altitude work platform is a movable lift platform used in outdoor or indoor. It is widely used in various industries such as high-altitude work, equipment installation, inspection, etc. The main products of high-altitude work platform are: straight arm/curved arm high-altitude work platform, scissor lift high-altitude work platform (manual push type, self-walking type), mast type high-altitude work platform, cylinder type high-altitude work platform and spider type high-altitude work platform. High-altitude work platform is widely loved by consumers in various industries due to its mobility and flexibility. With the increasing recognition of high-altitude work platform in the domestic market, the scope of platform use is also expanding. Therefore, the standardized operation of high-altitude work platform is particularly important. Below, we will introduce how to standardize the operation of high-altitude work platforms.

    ◆ 1. When using a high-altitude work platform, it must be equipped with professional operators who have been specially trained, passed the examination, and obtained a certificate.

    ◆2. The driver of the high-altitude work platform must start the equipment after performing various inspections and maintenance in accordance with the maintenance regulations of the machinery, and should check the working range of the equipment before the operation and remove obstacles that hinder the operation and walking of the equipment.

    ◆3, The legs are an important preparatory work for the operation of the high-altitude work platform, you should choose a flat ground, the foundation is soft or uneven ground, must be added to the material to ensure that the force after the work.

    ◆4, Equipment operators should wear safety helmets and safety belts and other safety protection measures before starting work, when working in areas with electricity, the car body should be grounded according to regulations, the equipment for high-altitude work should be commanded by the person in charge of the site, the signal issued by the commander must be clear and accurate.

    ◆5, Before the operation of the equipment, the person in charge of the work shall make a technical and safety briefing to the equipment operator and all personnel participating in the operation, which shall include: the content and requirements of the work; safety precautions and dangerous points; the division of personnel and the scope of responsibility; the person responsible for the work shall not only check the condition of the vehicle and the work of the staff, but also be responsible for checking the terrain environment and whether the take-off and landing meet the requirements of the technical safety measures or the pre-established work plan; if there is any difference, the corresponding measures shall be formulated before the work can begin.

    ◆ 6. If there are any conflicts between this regulation and national or industry regulations, national or industry regulations shall prevail.

    This is the basic operation standard of aerial work platform. Equipment users need to form the habit of regularly testing the operation of the equipment and regularly making maintenance plans for the equipment. This can not only extend the service life of the equipment, but also ensure the safety of the equipment users to a greater extent.